Obtain Good Wi-Fi Speed In Every Room Of Your House
Set Up The Synology Mesh Router Easily
How To Set Up my Synology Router?
Synology wireless routers are the most preferred among commercial space owners. While helping them with seamless internet connectivity, they also help avoid bandwidth issues. If you are wondering about the step-by-step process of Synology Router Setup, this blog is your place to be. You’ll find complete information starting from setting up the devices to configuring the settings online.
What’s Needed?
Synology wireless router
Smartphone/ Computer System
Network cables
Modem
Default Synology Router Login IP
The default IP address you can use for your Synology router is 192.168.1.1:8000
The default web address you can use is router.synology.com
Synology Router Setup
- To start with, take the network cables/ethernet cables and use them to connect your MODEM and the router. Now, also connect the router to the computer system(if you are using one). Connect the DSL communication line to the MODEM.
- Now, attach the power cords and plug them into an electrical outlet.
- Press the power buttons on the devices if any and wait for the devices to boot up. When the LEDs on the front panel light up, it indicates that the devices are ready to use.
Accessing The Web Setup Wizard
- Now, open the network settings on your computer system or smartphone and connect to the local device network of your Synology wireless router.
- Open a web browser on your system or smartphone and in the address bar type, 192.168.1.1 and press Enter. You can also use the address router.synology.com instead of the default IP address.
- You will be directed to the online Synology wireless login page. Enter the username and the password like credentials and proceed with the process. If you find trouble accessing the login page, check if you are using the correct credentials.
- The default username and password for Synology wireless login wizard is usually “Synology_Serial Number” and “synology” respectively. These credentials may also vary according to the Synology router model you own.
How To Set Up a Synology Mesh Router?
- From the main home page, click on the Internet menu.
- Select New Connection from the setup wizard. You can now follow the on-screen instructions.
- In some cases, you may get a prompt saying “PPPoE DSL connection detected”. Here, you will be required to enter the DL connection details. Contact your ISP and they may assist you with the same.
- Once you have entered the details, the router device will get configured, and the status of the internet connection will turn Good.
- Now, open the wireless section to configure your Wi-Fi network. Key in the name or the SSID which you want to keep for your network. Also, don’t forget to specify a strong network password. From the network encryption type, select WPA2-PSK or WPA3PSk, whatever is applicable.
- Save the changes and close the Synology router setup page. Disconnect your device from the network and reconnect to it once the setup process is complete.
This step concludes the Synology wireless setup process and you can proceed with accessing seamless internet in and around your home. If you need further information about the synology router setup guide, you can always reach out to the team at our end for help.
Accessing The Web Setup Wizard
If you are facing issues with the Synology router, there are always steps you can follow:
- Restart your Synology router. Press the power button and disconnect the power adapter from the device. Allow the device to stay like that and then power it on after about 30 seconds.
- Check the ethernet cable connections between the devices. You can replace the cables if you find any issues in the same.
- If you continue to face issues with the Synology router setup, you can always reset the device to factory settings.
How To Reset Your Synology Router?
Whether you are facing issues with the functionality of your Synology router, or you have lost access to the web based setup wizard, or something else, resetting your RT2600AC can help regain all of that. Making a reset will erase all the configuration and changes you had applied earlier.
If you have been looking online for the steps to RESET your Synology RT2600AC router, here is some information to help you out.
Now, you can make the Synology RT2600AC reset in two ways: Either using the RESET button, or using the web-based router management wizard.
Synology Reset Using Web Portal
Now, if you want you can also RESET the settings of your synology router using the online settings wizard. No, you do not need to download anything, just open the web browser, type in the web address and change the settings as needed. Remember that this method of RESET will delete all internet and wireless settings like IP addresses, DNS, Wi-Fi password, etc. Therefore, it is recommended to save all of them if possible.
Once you are sure, you can begin with the steps as mentioned below:
- Make sure your device is connected to a computer system or a smartphone.
- Now, open a web browser of your choice and in the address bar type the default IP address of the router. Press Enter and you will be directed to the Synology router setup wizard.
- Type in the admin username and the password which you had set at the time of the initial setup.
- From the main dashboard you’ll see the RESET tab. Click on it.
- Now, click on the RESET Device settings button on the page. You will see a prompt to confirm your action. Tap on Yes and the router will reboot.
- You will need to reconfigure your Synology router once again using the synology router setup process.
The Synology mesh access point reset is now complete and you can begin using the internet once again.
